The All - Tec EQs V2 plug - in is a brilliant emulation of the iconic 1950s ALTEC passive analog equalizers. These hardware units have graced countless records and are still in use today. V2 adds an adjustable analog circuit module that mimics the complex behavior of analog tubes and transformers, creating a lovely analog saturation effect for any input sound. It features a rewritten DSP engine, a new resizable UI with two skins, and a new 9067 Filter module. The plug - in includes three equalization modules modeled after Altec hardware. Each module can be used individually or together for full - range equalization. The 9067 Filter has two high - quality 18 dB/octave high - pass and low - pass filters with 10 frequency options per band. The 9063 Equalizer is for low and high frequencies, with two adjustable bands. The 9062/73 Graphics Equalizer has seven bands adjustable up to +/- 8 dB, and band frequencies can be switched between 9062 and 9073 models. The PRE - 2C is the master section for adjusting input/output levels, analog character, and dry/wet mixing.
Using the All - Tec EQs V2 is easy. First, decide which equalization module you want to use. You can use the 9067 Filter for filtering frequencies, the 9063 Equalizer for low and high - frequency adjustments, or the 9062/73 Graphics Equalizer for more detailed band - by - band control. You can enable or disable each module as you like. The PRE - 2C module is used to fine - tune the overall settings such as input and output levels, and the dry/wet mix. When using, make sure to adjust the settings gradually to avoid over - processing. For maintenance, keep your software up - to - date to ensure the best performance. If you encounter any issues, check the official Nomad Factory support page for solutions.
