CAD WX200 UHF Dual Channel Hand-Held Wireless Microphone System

The CAD WX200 is an outstanding fixed - frequency dual handheld wireless system. It comes with a receiver, two handheld transmitters, a power supply, and a 3.275’ (1m) unbalanced ¼” cable. The all - metal receiver has separate displays and volume controls for each channel. AF and RF indicators on each channel verify the connection and signal transmission between the transmitters and the receiver. It offers both single XLR balanced outputs for each channel or a combined ¼” output, giving you more flexibility. With advanced antenna technology, it provides an operating distance of up to 164’ (50m) between the transmitter and the receiver. Each handheld transmitter shows the current frequency and has an easy - to - access on/off switch. Powered by 2 AA batteries (not included), it can run for up to 10 hours. Key features include: up to 164' (50m) range, all - metal receiver, individual balanced XLR outputs or combined ¼” output, and over 10 hours of operation with 2 AA batteries.

Using the CAD WX200 wireless microphone system is easy. First, insert 2 AA batteries into each handheld transmitter. Then, connect the receiver to your audio device using either the single XLR balanced outputs for each channel or the combined ¼” output, depending on your needs. Turn on the transmitters and the receiver. You can adjust the volume on the receiver for each channel separately. The operating range is up to 164’ (50m), so you can move around freely. Remember to turn off the devices when not in use to save battery life. When it comes to maintenance, keep the devices clean and dry. Avoid exposing them to extreme temperatures or humidity. If the signal becomes weak, check the batteries and make sure the antennas are in good condition.