CAD WX55 Digital Handset Wireless Microphone System

The WX55 is an amazing Digital Frequency Agile Bodypack Wireless System. It's super easy to use! The QuickMic™ receiver has an integrated ¼' jack. Just plug it into an open channel on your mixer, and you'll get high - quality audio for your next performance. The transmitter shows the current frequency, signal strength, and battery life. This system comes with a head - worn microphone. It offers Digital High Definition Audio. With its Frequency Agile Design (16 switchable frequencies), you can use up to 15 systems simultaneously. The range between the transmitter and receiver is up to 164' (50m). Connect to your mixing board quickly via the QuickMic™ and the integrated ¼' jack. Both the transmitter and receiver have low - battery indicators. The transmitter uses 2 AA batteries and can operate for over 8 hours. It includes an HW microphone. PLU: WX55

Using the CAD WX55 Digital Wireless Handset Microphone System is a breeze. First, make sure the transmitter has 2 fresh AA batteries. Then, plug the receiver's integrated ¼' jack into an open channel on your mixer. Turn on both the transmitter and the receiver. You'll see the current frequency, signal strength, and battery life on the transmitter display. You can switch between 16 frequencies as needed. You can use up to 15 of these systems at the same time. Just keep in mind that the range between the transmitter and receiver is up to 164 feet (50 meters), so don't go too far apart. Also, keep an eye on the low - battery indicators on both the transmitter and receiver. When the battery is low, replace the AA batteries in the transmitter to keep it running for over 8 hours. To maintain your system, keep it clean and store it in a dry place when not in use. The included head - worn microphone can be cleaned gently with a soft cloth.